Search
Keywords:
Creator ID:
Type:
Categories:
Languages:
Orientation:
Color:
Model property release:
Duration Video:

Results (0)

 Auto paging
 Menu
Inspectors Check Defects in Welded add Joints of Steel Pipe with Process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)
Inspectors Check Defects in Welded add Joints of Steel Pipe with Process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

Inspectors are Inspection defects in Welded Steel H-beam add joints with Process Ultrasonic Testing (UT) of Non-Destructive Testing (NDT)
Inspectors are Inspection defects in Welded Steel H-beam add joints with Process Ultrasonic Testing (UT) of Non-Destructive Testing (NDT)

Visual Inspection (VI) or Visual Testing (VT), Marking Defects on Welded with Solid Marker.
Visual Inspection (VI) or Visual Testing (VT), Marking Defects on Welded with Solid Marker.

Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)
Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

The painter uses a spray gun to paint a steel structure before transportation to the assembly yard.
The painter uses a spray gun to paint a steel structure before transportation to the assembly yard.

The painter is working to painting the steel structure with spray gun at industrial factory. focus on hand
The painter is working to painting the steel structure with spray gun at industrial factory. focus on hand

Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.
Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.

Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)
Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).
Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Steel from destructive testing (DT) is Bending test, Macro test, Tensile test and Impact test, on black background.
Steel from destructive testing (DT) is Bending test, Macro test, Tensile test and Impact test, on black background.

Porosity or Cluster Porosity in Welded, Defect of Welding with Process Flux Cored Arc Welding (FCAW).
Porosity or Cluster Porosity in Welded, Defect of Welding with Process Flux Cored Arc Welding (FCAW).

Apply Liquid Penetrant into the welded so that the liquid penetrant into the defect for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).
Apply Liquid Penetrant into the welded so that the liquid penetrant into the defect for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.
Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.

The painter is working to painting color top coat on steel structure with spray gun, at industrial factory.
The painter is working to painting color top coat on steel structure with spray gun, at industrial factory.

Measurement the pipe threads with thread pitch gauge or screw pitch gauge.
Measurement the pipe threads with thread pitch gauge or screw pitch gauge.

The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.
The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.

The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.
The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.
The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Checking defect in welded of steel add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT), focus on hand that conducts the welding test.
Checking defect in welded of steel add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT), focus on hand that conducts the welding test.

Fastening of steel girder on trailer with ratchet binders or lever binders before delivery to site.
Fastening of steel girder on trailer with ratchet binders or lever binders before delivery to site.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.
Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

Painter is painting a steel H-beam of steel structure work with spray gun.
Painter is painting a steel H-beam of steel structure work with spray gun.

The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.
The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.

Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)
Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).
Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Macro test is performed in a cross-section, longitudinal section or 'Z' direction (through thickness) as an independent test to assess subsurface conditions or to reveal effects on the subsurface.
Macro test is performed in a cross-section, longitudinal section or 'Z' direction (through thickness) as an independent test to assess subsurface conditions or to reveal effects on the subsurface.

Step to Non-Destructive Testing(NDT) of welding with process Magnetic Particle Testing(MT).
Step to Non-Destructive Testing(NDT) of welding with process Magnetic Particle Testing(MT).

A welder is welding the stiffener of steel structuring with Flux-cored arc welding, at an industrial factory.
A welder is welding the stiffener of steel structuring with Flux-cored arc welding, at an industrial factory.

Worker is sandblasting a welding surface and steel structure with pressure blasting pot for create surface profile of steel before painting.
Worker is sandblasting a welding surface and steel structure with pressure blasting pot for create surface profile of steel before painting.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.
Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

Porosity or worm hole in weld, Defect of welding process Flux Cored Arc Welding (FCAW)
Porosity or worm hole in weld, Defect of welding process Flux Cored Arc Welding (FCAW)

Painter is working to painting color top coat on steel structure with spray gun, at industrial factory.
Painter is working to painting color top coat on steel structure with spray gun, at industrial factory.

Painter is working to painting color top coat on steel structure with spray gun, at industrial factory.
Painter is working to painting color top coat on steel structure with spray gun, at industrial factory.

Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.
Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Robotic Welding Machine, Welding a Steel Plate of Steel Structure with Robotic Welding or Robotic Arm Welding at Industrial Factory.
Robotic Welding Machine, Welding a Steel Plate of Steel Structure with Robotic Welding or Robotic Arm Welding at Industrial Factory.

Using the welding gauge to measure the throat thickness of welding process Submerged Arc Welding(SAW)
Using the welding gauge to measure the throat thickness of welding process Submerged Arc Welding(SAW)

The step two of doing penetrant testing is step to use spray Liquid Penetrant into the brush before apply to the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).
The step two of doing penetrant testing is step to use spray Liquid Penetrant into the brush before apply to the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Spatter and porosity on welded, Defect of welding process Flux Cored Arc Welding (FCAW)
Spatter and porosity on welded, Defect of welding process Flux Cored Arc Welding (FCAW)

After complete fabrication at an industrial factory, the painter uses a spray gun to paint a steel structure.
After complete fabrication at an industrial factory, the painter uses a spray gun to paint a steel structure.

Workers are using a Impact Wrench to torque bolts to hold the splice plate with steel girder at splice joint of steel structure work.
Workers are using a Impact Wrench to torque bolts to hold the splice plate with steel girder at splice joint of steel structure work.

The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.
The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.

The step two of doing penetrant testing is step to use spray Liquid Penetrant into the welded so that the liquid penetrates into the defect for Non-Destructive Testing with process Penetrant Testing.
The step two of doing penetrant testing is step to use spray Liquid Penetrant into the welded so that the liquid penetrates into the defect for Non-Destructive Testing with process Penetrant Testing.

Measure Dry Film Thickness (DFT) with Coating Thickness Gauge for fireproof painting on steel structure, at industrial factory.
Measure Dry Film Thickness (DFT) with Coating Thickness Gauge for fireproof painting on steel structure, at industrial factory.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.
Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.
Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

The painter is working to painting the steel structure with spray gun, at Industrial factory.
The painter is working to painting the steel structure with spray gun, at Industrial factory.

The painter is working to painting the steel structure with spray gun.
The painter is working to painting the steel structure with spray gun.

Yellow Forklift in the factory outdoor area.
Yellow Forklift in the factory outdoor area.

Brinell hardness test of steel and welded at heat affected zone(HAZ) after welding complete.
Brinell hardness test of steel and welded at heat affected zone(HAZ) after welding complete.

The inspectors are checking defect in welded of steel add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)
The inspectors are checking defect in welded of steel add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

Impact test by striking a standard sized test piece until it fractures. To study about the impact strength (Dynamic Load) of the material.
Impact test by striking a standard sized test piece until it fractures. To study about the impact strength (Dynamic Load) of the material.

Use Developer Sprays into the welded to pull the liquid penetrant from the defect for interpretation defects on welded, Non-Destructive Testing (์NDT) with process Penetrant Testing (PT).
Use Developer Sprays into the welded to pull the liquid penetrant from the defect for interpretation defects on welded, Non-Destructive Testing (์NDT) with process Penetrant Testing (PT).

Brinell hardness testing of alloy pipe and welding after a post weld heat treatment (PWHT)
Brinell hardness testing of alloy pipe and welding after a post weld heat treatment (PWHT)

Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.
Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Using welding inspection mirror for check visual welding defects in a niche.
Using welding inspection mirror for check visual welding defects in a niche.

Measure Dry Film Thickness (DFT) for painting on steel structure, at industrial factory.
Measure Dry Film Thickness (DFT) for painting on steel structure, at industrial factory.

Brinell hardness test of steel and welded at heat affected zone(HAZ) after welding complete.
Brinell hardness test of steel and welded at heat affected zone(HAZ) after welding complete.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.
Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

Young girl is drinking soft drink.
Young girl is drinking soft drink.

The collection tree isolated on white background.
The collection tree isolated on white background.

Inspectors are Inspection defects in Welded Steel H-beam add joints with Process Ultrasonic Testing (UT) of Non-Destructive Testing (NDT)
Inspectors are Inspection defects in Welded Steel H-beam add joints with Process Ultrasonic Testing (UT) of Non-Destructive Testing (NDT)

The step fourth of doing penetrant testing is step to use Developer spray into the welded to pull the liquid penetrate from the defect for Non-Destructive Testing with process Penetrant Testing(PT)
The step fourth of doing penetrant testing is step to use Developer spray into the welded to pull the liquid penetrate from the defect for Non-Destructive Testing with process Penetrant Testing(PT)

A worker is Stamping a Number on a Steel Structure Piece with a Mobile dot peen marker.
A worker is Stamping a Number on a Steel Structure Piece with a Mobile dot peen marker.

H-beam steel cutting with Hand Gas Cutting Torches, at the industrial factory.
H-beam steel cutting with Hand Gas Cutting Torches, at the industrial factory.

The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.
The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Two young asian girls dressed up according to local traditions and standing with fun expressions and smiles, In the middle of the green rice fields.
Two young asian girls dressed up according to local traditions and standing with fun expressions and smiles, In the middle of the green rice fields.

Three Workers are Working at Height with Telescopic Boom Lifts. For Safety in Working at Heights at Industrial Factory.
Three Workers are Working at Height with Telescopic Boom Lifts. For Safety in Working at Heights at Industrial Factory.

The welder is welding a steel structure with the process Flux Cored Arc Welding (FCAW) in Industrial factory.
The welder is welding a steel structure with the process Flux Cored Arc Welding (FCAW) in Industrial factory.

Tools and equipment for Non-Destructive Testing(NDT) of welding. with process Penetrant Testing or Penetration Testing(PT).
Tools and equipment for Non-Destructive Testing(NDT) of welding. with process Penetrant Testing or Penetration Testing(PT).

Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.
Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.
Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

CNC Plasma Cutting, Cutting Pipe Carbon With CNC Plasma Cutting Machine.
CNC Plasma Cutting, Cutting Pipe Carbon With CNC Plasma Cutting Machine.

The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.
The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.

The painter uses a spray gun to paint a steel structure before transportation to the assembly yard.
The painter uses a spray gun to paint a steel structure before transportation to the assembly yard.

Inspectors are Inspection defects in Welded Steel H-beam add joints with Process Ultrasonic Testing (UT) of Non-Destructive Testing (NDT)
Inspectors are Inspection defects in Welded Steel H-beam add joints with Process Ultrasonic Testing (UT) of Non-Destructive Testing (NDT)

Fastening of steel girder on trailer with ratchet binders or lever binders before delivery to site.
Fastening of steel girder on trailer with ratchet binders or lever binders before delivery to site.

A worker uses Grinding Machine to grind the surface of the steel plate before assembling it into the steel pipe, at an Industrial factory.
A worker uses Grinding Machine to grind the surface of the steel plate before assembling it into the steel pipe, at an Industrial factory.

Painter is working to painting color top coat on steel structure with spray gun, at industrial factory.
Painter is working to painting color top coat on steel structure with spray gun, at industrial factory.

Visual Inspection (VI) or Visual Testing (VT), Marking Defects on Welded with Solid Marker.
Visual Inspection (VI) or Visual Testing (VT), Marking Defects on Welded with Solid Marker.

Measure the Fillet Weld Leg Length of the Welded with a Welding Gauge or Bridge Cam Gauge.
Measure the Fillet Weld Leg Length of the Welded with a Welding Gauge or Bridge Cam Gauge.

The step three of doing penetrant testing is step to use Solvent Remover spray into the rag to remove Liquid Penetrant out of the welded for Non-Destructive Testing with process Penetrant Testing(PT)
The step three of doing penetrant testing is step to use Solvent Remover spray into the rag to remove Liquid Penetrant out of the welded for Non-Destructive Testing with process Penetrant Testing(PT)

Macro test is performed in a cross-section, longitudinal section or 'Z' direction (through thickness) as an independent test to assess subsurface conditions or to reveal effects on the subsurface.
Macro test is performed in a cross-section, longitudinal section or 'Z' direction (through thickness) as an independent test to assess subsurface conditions or to reveal effects on the subsurface.

The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.
The painter is working to fireproof paint on steel structure with spray gun, at industrial factory.

A welder is using a Stud Welding Machine to weld stud bolt on steel plate, at industrial factory.
A welder is using a Stud Welding Machine to weld stud bolt on steel plate, at industrial factory.

Technicians are using a measuring tape to check the accuracy of the steel structure after assembly before delivery to paint.
Technicians are using a measuring tape to check the accuracy of the steel structure after assembly before delivery to paint.

Painter is working to paint color topcoats on steel structures with a spray gun at the industrial factory, focusing on hand holding a spray gun.
Painter is working to paint color topcoats on steel structures with a spray gun at the industrial factory, focusing on hand holding a spray gun.

The painter uses a spray gun to paint a steel structure before transportation to the assembly yard.
The painter uses a spray gun to paint a steel structure before transportation to the assembly yard.

A Mobile Crane Lifts a Barge onto a Trailer for Transport from the Fabrication Shop to the River.
A Mobile Crane Lifts a Barge onto a Trailer for Transport from the Fabrication Shop to the River.

A Mobile Crane Lifts a Barge onto a Trailer for Transport from the Fabrication Shop to the River.
A Mobile Crane Lifts a Barge onto a Trailer for Transport from the Fabrication Shop to the River.

Inspectors are Checking Defects in Welded Steel Plate add joints with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT) at the Industrial Factory.
Inspectors are Checking Defects in Welded Steel Plate add joints with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT) at the Industrial Factory.

Brinell hardness test of steel and welded at heat affected zone(HAZ) after welding complete.
Brinell hardness test of steel and welded at heat affected zone(HAZ) after welding complete.

Measure Dry Film Thickness (DFT) for painting on steel structure, at industrial factory.
Measure Dry Film Thickness (DFT) for painting on steel structure, at industrial factory.

Step to Non-Destructive Testing(NDT) of welding with process Magnetic Particle Testing(MT).
Step to Non-Destructive Testing(NDT) of welding with process Magnetic Particle Testing(MT).

Workers are using hydraulic jacks. bending steel plate in industrial factory.(Focus on bending steel plate point)
Workers are using hydraulic jacks. bending steel plate in industrial factory.(Focus on bending steel plate point)

Welder is working welding pipe carbon with process Tungsten Inert Gas Welding (TIG) or Gas Tungsten Arc Welding(GTAW) at Industrial Factory.
Welder is working welding pipe carbon with process Tungsten Inert Gas Welding (TIG) or Gas Tungsten Arc Welding(GTAW) at Industrial Factory.

Step to use brush apply Liquid Penetrant into the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).
Step to use brush apply Liquid Penetrant into the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)
Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

Defects Inspection on Welded Splice Joint with Process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at an Industrial Factory.
Defects Inspection on Welded Splice Joint with Process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at an Industrial Factory.

Checking Defects in Welded add Joints to Steel Plate with Process Ultrasonic Testing (UT) of Non-Destructive Testing(NDT)
Checking Defects in Welded add Joints to Steel Plate with Process Ultrasonic Testing (UT) of Non-Destructive Testing(NDT)

Welder Qualification Testing(WQT) with Process Flux Cored Arc Welding (FCAW), Before Starting Welding in the Factory.
Welder Qualification Testing(WQT) with Process Flux Cored Arc Welding (FCAW), Before Starting Welding in the Factory.